Canon Printer Reset EEPROM MP Series 198- 250- 258- 270- 276- 496- 558- 568- 648Media Pasta

type='html'>How to Reset Canon MP198, MP 250, MP258, MP270, MP276, MP496, MP558, MP568 and MP648 All In One Printer.

Hello Canon AIO users. I've received a few e-mails recently regarding troubleshooting for Canon printers. My trouble shooting guide, tips and tricks is based on what I've experienced with. More or less, the tips is still valid, if you have the same or equivelant Canon MP Series printer models, then you could give it a try.

Today, I would like to share with you a more advance troubleshooting guide for your Canon MP Series All In One printer. The Canon Printer MP Series models stated above. I am not sure if it will troubleshoot other MP printer models, but my advise, with a little of Google-ing, by mix match technical specifications with the above printers and yours, if its compatible, why not, have a go.

Why my printer model not listed, but the images displayed looks exactly the same? Well, as Canon printers especially the Canon MP Series AIO printer is available all over the world, it is part of their marketing strategy, which is fairly different between one country to another. Certain countries will have the same model code while others, might have a slight change depending on the added features for that model. So, these printers will have the same outlook but a slightly different features inside. For your info, some of AIO printers uses almost the same internal boards for printing.

EEPROM Reset Tool

This is a reset tool I found during mid 2009 and amazingly, it is still there and ready to download for personal use. This is an EEPROM Clear Tool for Canon MP198, MP 250, MP258, MP270, MP276, MP496, MP558, MP568 and MP648 All In One Printer and also acts as a resetter tool which will reset the basic printer features from your personal computer. Due to the initial design for Canon MP Series AIO printer for home and small office use, the resetter tool was specially developed to facilitate some P-XX ERRORS (cause from extensive printing).

Personally, I've used this resetter tool on Canon MP 250, MP258, MP270 and MP278 AIO printers. But for the rest of the list, you probably have to find out since I've not tested it before. The resetter tool is used for:

Reset black ink counter.
To reset colour ink counter
To reset ink absorber counter
Ink cleaning from PC button
Check paper feed maintenance work from printer
Prevent on screen low level ink warnings during printing jobs on your PC

This reset tool will not do the following:-

Stop the low level blinking at printer
Stop the orange blinking due to paper feed error

Note: There is NO resetting method to stop the low ink level blinking on your Canon MP Series printer. The alarm is designed based on the initial ink cartridge inserted from its first use. Canon MP Series printers uses print counts to check ink levels, not by a special level gauge built at ink cartridge. So, the low ink level blinking can be disregarded if you are using ink refills cartridges.

Step by step to Reset your Canon MP Series AIO Printer

Step 1

Download MP Tool Reset tool ServiceTool_1050.zip (no password required-if ad does not automatically clear, press skip ads top right corner) here and extract. It comes in a .zip file and you do not have to install to your PC. Its safe and runs under Windows Vista, Windows Xp and Windows 7 (All Versions)

Step 2

Entering your printer into service mode.

Turn the printer off if the printer power is on. Remove printer USB cable from your computer.
While the printer is OFF, press and hold the Start/Stop button, if not, on other models press Resume/Cancel button.
While still holding the Start/Stop button or Resume/Cancel button, press and hold the POWER button.
When the POWER LED (green light) is lit, release the Start/Stop or Resume/Cancel button (still holding the POWER button).
While still holding the power button, Press the Start/Stop button or Resume/Cancel button TWICE then Release the POWER button. Wait until LCD printer display 0 (zero) on the printer display counter.
After the display is 0, attach the printer USB cable to your computer, it will detect a new device installed (its normal), and now you can go to the resetting steps.

Step 3

Resetting Ink counter on the Computer
Run “service_tool 1050.exe”. you can download the service tool software from the link given above.

Confirm detected USB-port number on USB port column on your computer.
Click “Main button” on Clear ink counter section. Make sure there are papers in the paper feed because the printer will print after the process is complete.
Click on the “Clik MAIN” button - wait, then "EEPROM Clear" - wait, then "ËEPROM". The printer will print a sample check each time by clicking the previous buttons.

After the steps completed, turn off the printer and then turn printer back on. If printer button does not switch off by pressing once, turn of the power cable. After turning on back again. your printer will automatically be out of service mode and ready for use.

Note: You can try to use its other features during STEP 3 eg. cleaning, check paper feed button, if it is compatible with your printer internal board.